Products News

A Guide to Lightning Arrester Types

  • Tuesday, 16 September 2025
  • 0
  • 706
  • 0

A Guide to Lightning Arrester Types

When lightning strikes, it creates a high-voltage surge that can damage equipment.lightning arrester types Lightning arresters protect the line by limiting this excess energy and diverting it to ground. They aren’t just for mansions and smart houses, though – they can be found in any residential or commercial electrical system. A professional electrician can recommend and install the best lightning arrester for your home or business, depending on its location and lightning risk.

There are many different types of lightning arresters, each with its own unique characteristics and suitable applications.lightning arrester types The type you need will depend on your voltage level, frequency, environment, and more. To help you choose the right one, here is a guide to the various lightning arrester types.

Porcelain arresters use ceramic housing to contain metal oxide elements, making them durable and able to withstand high temperatures.lightning arrester types These are commonly used in power systems, substations, and industrial environments. They have a low initial cost, and they offer reliable and effective protection.

The arc flash gap arrester uses a series of small metal cylinders, each separated by air gaps and insulated from each other. Under normal operating conditions, the potential difference between the first cylinder and the last is evenly distributed across the air gaps. When a surge occurs, the potential difference becomes much larger, and the arc flash gap is triggered. The resulting sparks quickly drain the excess current.

This is the most common type of lightning arrester, and it uses the nonlinear voltage-current characteristic of aluminum hydroxide to provide surge protection. A thin film of the substance forms on the aluminium plates immersed in an electrolyte, and it presents a high resistance at low voltages but a lower resistance at a critical value. At this point, the insulator breaks down and allows current to flow.

Another type of surge arrester, this device relies on the differential impedance between a sphere electrode S1 and an auxiliary needle. It has a lower impulse ratio than the arc flash gap arrester, and it is often used for outdoor applications.

The shunt-type surge arrester is designed to prevent overvoltages caused by switching operations and remote lightning strikes. It has a relatively large discharge capacity and is installed in the interfaces of the LPZ 1 and LPZ 2 lightning protection zones. These arresters reduce the overvoltages to a level safe for the end device, and they are typically installed in the sub-distribution board. They are a good option for protecting sensitive equipment, like data centers or power electronic circuits. These are also commonly used on telecom towers and antenna masts, and in solar and wind farms. The shunt-type surge arrester also requires less maintenance than the arc flash gap arrester. In addition, it is highly durable and has a long life. The shunt-type surge arrester can withstand overvoltages up to 4 kV and can be easily replaced with a new unit if necessary. This is one of the most affordable and versatile surge arrester types available.

0users like this.

Leave a Reply

Blog Tag
RSS